Equipment Parameters
Equipment model
|
SDY-QF650-B
|
Supply voltage
|
380V/50Hz
|
Air source pressure
|
0.5~0.8Mp
|
Main motor power
|
15KW（Depends on the material）
|
Spindle speed
|
2850rpm(Supports Variable Frequency Drive）
|
Maximum cutting width
|
340mm
|
Maximum cutting height
|
145mm
|
Cutting accuracy
|
±0.1mm
|
Cooling method of saw blade
|
Minimum quantity lubrication
|
Blade size
|
Φ 650mm Backward compatibility
|
Feeding servo motor power
|
1.5KW
|
Sawing feed servo motor power
|
1.5KW
|
Tail servo motor power
|
750W（Zero waste equipments have）
|
Power of dust collector
|
5.5KW
|
Single feeding length
|
15-850mm(Circular feeding）
|
Overall dimensions of equipment
|
About 2400*1750*1850
mm
|
Equipment Photos
Equipment Features
1.Special process does not damage materials: The equipment has an independently invented patented anti-scratch structure. The work surface does not need to be equipped with any anti-scratch materials (such as bakelite, rubber sheet, etc.). Any aluminum profile will not be scratched due to friction during the movement of the equipment.
2.The remaining tail material is short: the tail material of the self-developed ordinary model can be as short as 120mm, which is more than 2 times shorter than the standard model in the same industry. The tail material of the tailless model can be as short as 30mm, which greatly saves material costs for the majority of users.
3.Stable and high-precision cutting: the entire series of equipment adopts the transverse feed method to ensure its cutting stability.
4.Cutting of different lengths: The fully automatic equipment can cut the same material into multiple sections of different lengths, saving time for manual material change. The servo system feeds the material with stable feeding accuracy and higher efficiency.
5.Environmentally friendly micro-lubrication system: The entire series of equipment is equipped with a micro-cooling and lubrication system, which can extend the service life of the saw blade by more than 30%. The surface of the cut material is smooth and burr-free. It is equipped with a professional dust suction device to prevent aluminum chips from flying all over the sky.
6.Patented lifting feeding mechanism: The equipment has an automatic lifting function to reduce resistance and ensure that no material is carried over during secondary feeding or when the feeding mechanism retracts.
7.The whole equipment is grounded to effectively avoid the potential safety hazard of electric shock caused by leakage.
8.The equipment adopts multiple dust suction ports and is equipped with a high-power dust collector to effectively improve the efficiency of aluminum chip recovery.