SDY-QFW550-B Fully Automatic Aluminum Cutting Machine | No Remnant, High Precision, Multi-Material
When you cut aluminum profiles, three things matter most: how much material is wasted, how stable the accuracy is, and whether one machine can handle several materials. The SDY-QFW550-B fully automatic aluminum cutting machine is built around exactly these three points. It automatically feeds 6-meter raw stock and cuts to preset length under CNC control, combining high efficiency with high precision.
1. Material Saving: Truly No Remnant The remaining remnant is less than 1mm, shorter than one finished part. This means aluminum profiles can be cut with CNC automatic feeding and genuinely no remnant left over. In volume production, the material cost saved is considerable.
2. High Precision: Dual Separation Retraction System The dual separation retraction system makes sawing more stable and more precise, holding the cutting tolerance steadily within +/- 0.1mm.
3. Wide Cutting Capacity Maximum cutting height 170mm, maximum cutting width 400mm, covering the cutting needs of most aluminum sizes on the market and reducing the need to purchase several machines.
4. High Versatility: One Machine for Multiple Materials It cuts all types of aluminum profiles, aluminum tubes, aluminum bars and heat sinks, and it can also cut copper. One machine covers multiple materials and order types.
5. Noise Reduction and Dust Protection: Fully Enclosed Design The fully enclosed body offers high protection, keeping dust and noise at a more comfortable level with low maintenance cost.
6. Safer Operation: Safety Door Interlock The machine program is equipped with a safety door interlock. Sawing cannot start unless the door is closed, making operation safer.
7. Stable Feeding: Servo Driven Feeding, sawing infeed and remnant handling are all driven by servo motors for fast, stable and reliable motion.
8. No Scratching on Material The worktable plate uses a patented structural design that effectively protects the material surface during cutting and reduces rework caused by surface scratches.
9. Ultra-Thin Saw Blade Option for Further Savings The high-precision spindle accuracy is 0.05mm, so an ultra-thin saw blade can be fitted. The thinner the blade, the narrower the kerf and the less material is consumed.
10. High Stability: Imported Core Components Ball screws and linear guide rails are all imported brands, ensuring stability and consistency in long-run sawing production.
11. Long Feeding Length Single feeding length reaches 850/1200mm, with repeat feeding supported, so the machine handles both small parts and profiles up to 1200mm.
If you are cutting aluminum profiles, tell me your material dimensions and cutting requirements. This model may not be the right fit for you, but I will recommend a more suitable machine based on your actual needs.